Tenergy 2 Pack 6v 1600mah Hump Nimh Battery Pack W/ Hitec Connector For Rc Car

WELCOME TO THE OFFICIAL TENERGY EBAY STORE

   

     

     

         

     

     

     

     

     

     

     

     

     

     

     

 

   

 

   

     

     

 

 

 

 

 

Tenergy 2 Pack 6V 1600mAh Rechargeable Side by Side Hump Battery Pack, NiMH Receiver Battery Pack with Hitec Connector for RC Trucks, RC Cars, and RC Hobby Electronics Item #19047 Incredible performance

- An Ideal hobby battery pack with 1600mAh high capacity, rapid charge, and long run time.

Battery size compatibility

- Confirm sizing and fit by comparing your original battery dimensions and connector to ensure a proper match.

Lightweight but powerful

- Packs a powerful punch while weighing only 117g and measuring 50 x 30 x 30mm.

Minimal maintenance

- Recharge anytime without needing to discharge and drain the battery.

Quality construction

- Built with Tenergy's high standard, this 6V NiMH battery pack is made from high quality cells.

What's included in this listing?

2 x Tenergy 6V 1600mAh Rechargeable Side by Side Hump Battery Pack

Product Description
Features And Benefits

INCREDIBLE PERFORMANCE

- High quality 1600mAh RC receiver battery with Hitec connector. An ideal hobby RC replacement battery pack with 6.0V of power, rapid charging, and long cycle life.

WIDE COMPATIBILITY

- This rechargeable NiMH battery pack is 50x30x30mm and works with most popular model RC car receivers like Nitro and Monster.

LIGHT WEIGHT BUT POWERFUL

- An ideal NiMH flat battery pack for radio receiver cars with a Hitec connector. Packs a powerful punch while weighing only 117g and measuring 50 x 30 x 30mm.

QUALITY CONSTRUCTION

- Built with Tenergy's high standard, this 6V NiMH battery pack is made from high quality cells arranged in a side by side trapezoid of 5 x 2/3 A size batteries.

Battery Specifications:

Voltage: 6V

Capacity: 1600mAh

Construction: Made of 5 x 2/3 A size NiMH cells

Connector: Hitec connector

Shape: Side by side trapezoid

Feature: Rapidly charges up and long runtime, recharging up to 1000 times

Weight: 117g

Dimension: 50 x 30 x 30mm

Charger Recommendation: Purchase Here Compatible Battery Packs 6V to 12V NiMH Battery Packs NiMH/NiCd 1.2V-18V LiPO/Li-ion 3.7V-22.2V LiFePO4 3.2V-19.2V SLA 2V to 20V Connectors Included Standard Tamiya Mini Tamiya Alligator Clips Standard Ta miya Mini Tamiya JST HiTec EC3 Deans XT60 Bare Leads Charging Rate 1A or 2A 0.1A to 5A Timer Cutoff 5hrs N/A Capacity Range 1A for 1000mAh to 2000mAh 2A for 2000mAh to 9000mAh N/A
Extend Your NiMH Battery Pack Life With The Following Practices:

Fully recharge your new battery pack when you first receive it.

Do not over-discharge the battery, stop using it when you notice a drop in  performance.

Do not over-charge the battery, remove the battery from charger when you are  done recharging.

Heat lowers battery life, do not charge or discharge the battery when it's  hot. Always let the batteries cool down to room temp before using  it/charging it.

Do not store the battery with low voltage, recharge after each use to avoid  over-discharge.

Always store the battery in a dry and cool place, never expose it to heat or  direct sunlight.

Recharge the battery once every 6-month, if they will be unused or stored  long term.

Frequently Asked Questions

Will this be compatible with my device/will this work as a replacement for my battery?

Typically when replacing a battery pack, users must match the following specs with their original battery pack: Chemistry Voltage Size/dimensions (if applicable) Connector Type (if applicable) Generally if those match, it should be compatible. The same can also be applied when looking for a compatible charger. If unsure about what specs to look for, we recommend contacting the device manufacturer first for more information.

Returns Accepted for this item if it's within 30 Days